MCGILL CYR 1 1/2 S Cam Follower and Track Roller - Yoke Type

Mass:0.78 kg; Characteristic rolling element frequency, BSF:5.17 Hz; d:60 mm; da max:73.4 mm; Fatigue limit load, Cu:1.64 kN; Characteristic inner ring frequency, BPFI:5.93 Hz; rs min:1.5 mm; D:110 mm; f0:14.3; Nlim:3,900 rpm;

P:150 mm; T max.:100 °C; N:19mm; C0:6.65 kN; SW:3.18 mm; A5:18.3 mm; H2:51 mm; T min.:-20 °C; H1:76 mm; d:12.7 mm;

L1:17.5 mm; Weight:0.38 kg; H2:57 mm; H:30.2 mm; E:10 mm; A:30 mm; G:M6x1; s1:11 mm; T min.:-20 °C; Designation of bearing:US202G2;

T min.:-20 °C; S:22.2 mm; Weight:3.28 kg; T max.:100 °C; G:M6x1; L1:104 mm; Designation of bearing:UC211-34G2; J1:86 mm; Recommended tightening torque for set screw:16.8 Nm; d:53.98 mm;

d:55 mm; H:63.5 mm; L1:68 mm; G:R1/8"; S:22.2 mm; Z:77.7 mm; T max.:100 °C; Designation of housing:PE211N-; L:222 mm; Designation of bearing:UC211G2;

Setscrew Angle:65; Housing Product Type:K / DI; Seal Type:Triple Lip; Split Housing:SPLIT; d:2.1875 in; Bearing Insert Material:Steel; Grease Type:Mobilgrease XHP222; Bearing Series:203 Series; UPC:782475716869; Expansion Type:Expansion;

A:66 mm; H1:14 mm; Recommended tightening torque for set screw:22 Nm; T min.:-20 °C; A1:33 mm; H:63.5 mm; L1:47 mm; T max.:200 °C; N:M16; Designation of housing:PA211-;

Da max:26 mm; Nlim (grease):25,000 rpm; Bore:0.394 Inch | 10 Mill; Characteristic inner ring frequency, BPFI:4.93 Hz; Other Features:Deep Groove | With S; D:30 mm; Brand:NTN; Inventory:0.0; Internal Special Features:No;

L:95 mm; T min.:-40 °C; A:30 mm; Weight:0.85 kg; e:19 mm; Recommended tightening torque for set screw:3.7 Nm; G:R1/8"; Designation of housing:FE205-; B:34.8 mm; A2:45.9 mm;

Base to Center Height:Standard; Flinger Material:Stainless Steel; Shaft Attachment (2):D-Lock; Ball Material:440 STAINLESS STEEL; Housing Type:2 Bolt Pillow Block; Ring Size:Standard; Grease Type:Mobilgrease FM222; Ball Bearing Housing Series:208 Series; Flinger Type:INTERNAL RUBBER LIP; Bearing Inn

L1:87 mm; P:300 mm; A5:30.2 mm; Designation of bearing:UC209G2T04; Designation of housing:T209N-; L3:83 mm; Z:24.4 mm; A2:35 mm; L2:16 mm; C0:20.8 kN;

H1:22.5 mm; N:18mm; Designation of bearing:US211-32G2T20; Z:27.5 mm; A:60 mm; B:45.3 mm; T min.:-20 °C; J:176 mm; Weight:3.4 kg; N1:30 mm;

B:49.2 mm; N2:49 mm; L2:16 mm; Weight:2.3 kg; L1:87 mm; A1:16 mm; Designation of housing:T209N-; N1:19 mm; d:44.45 mm; s1:24.6 mm;

L:140 mm; Weight:3.37 kg; L1:40 mm; C:43.55 kN; J:100 mm; S:22.2 mm; T min.:-20 °C; C0:29.2 kN; T max.:100 °C; H1:25 mm;

H:47.6 mm; d:34.92 mm; E:20 mm; N:M14; C:25.7 kN; G:M6x1; Designation of open end cover:SCOU207-22; Designation of bearing:UC207-22G2L3; C0:15.2 kN; Weight:1.59 kg;