FAG 6003-2Z-L038-C3 Ball Bearings

Oil Speed Rating n2:2800 rpm; Sealed Speed Rating n3:1900 rpm; Grease Speed Rating n1:1900 rpm; Basic Static Radial Load Rating Co:224000 N; D:200.0000 mm; Fillet Radius ra:2.50 mm; d:95.000 mm; Accessories:No Shield, no Seal,; Basic Dynamic Radial Load Rating C:234000 N; B:77.80 mm;

J min.:295.275 mm; Cap bolt, SAE grade:8; End plug (suffix Y):EPR 14; H2:44.45 mm; P90°:84.5 kN; Bearing:23024 CCK/W33; P60°:141 kN; Max. speed for Taconite seal:725 r/min; P120°:52.5 kN; Appropriate attachment bolt size G:0.875 in;

d:45.000 mm; Basic Dynamic Radial Load Rating C:24200 N; Basic Static Radial Load Rating Co:19000 N; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:21000 rpm; Oil Speed Rating n2:31000 rpm; Fillet Radius rb:0.30 mm; B:16.00 mm; D:75.0000 mm;

Grease Speed Rating Open/Shielded n1:1900 rpm; Basic Dynamic Radial Load Rating C:216000 N; Sealed Speed Rating n3:1300 rpm; Basic Static Radial Load Rating Co:245000 N; D:310.0000 mm; Fillet Radius ra:2.00 mm; Oil Speed Rating Open/Shielded n2:2400 rpm; d:200.000 mm; B:51.00 mm; Accessories:Two Sea

G:M 24x2; d:25 mm; Basic static load rating C0:78 kN; l1 min.:53 mm; l7 min.:30 mm; d2 max.:65 mm; Mass rod end:0.53 kg; r1 min.:0.6 mm; Basic dynamic load rating C:72 kN; h:94 mm;

d:65 mm; F:73 mm; Mass inner ring:0.16 kg; r, r1,2 min.:1 mm; B:25 mm;

Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:3400 rpm; Accessories:One Seal & Snap-Ring; Oil Speed Rating n2:4500 rpm; B:57.20 mm; d:60.000 mm; D:130.0000 mm; Grease Speed Rating n1:3400 rpm; Basic Static Radial Load Rating Co:143000 N; Basic Dynamic Radial Load Rating C:134000 N;

db min.:111 mm; Fatigue load limit Pu:13.2 kN; Basic static load rating C0:110 kN; Reference speed:6000 r/min; F:108 mm; Mass bearing:1.31 kg; B:24 mm; d:95 mm; s max.:3.5 mm; Calculation factor kr:0.15;

α:20 °; d:937.5 mm; B:825.5 mm; Fatigue load limit Pu:5300 kN; Calculation factor kr:670; b:22.3 mm; r3,4 min.:4 mm; D:1270.25 mm; r1,2 min.:27 mm; K:12 mm;

Cap bolt:4 x 7/8-9 UNC; Labyrinth ring:2 x LOR 154; Housing:SAW 538; ba:92.869 mm; PosiTrac Plus contact element:2 x B10724-155; Mass pillow block:172 kg; R1:120.65 mm; R2:42.069 mm; Ca:129.819 mm; N1:34.925 mm;

Accessories:One Seal; B:68.30 mm; Grease Speed Rating n1:2400 rpm; D:170.0000 mm; Sealed Speed Rating n3:2400 rpm; d:80.000 mm; Oil Speed Rating n2:3400 rpm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:201000 N; Basic Static Radial Load Rating Co:236000 N;

Specific dynamic load factor K:100 N/mm²; dk:60 mm; d2 max.:104 mm; h:163 mm; Material constant KM:330; l2 max.:217 mm; l1 min.:92 mm; α:7 °; d:45 mm; Basic static load rating C0:200 kN;

Fillet radius ra max.:2 mm; Calculation factor Y0:1.6; Abutment diameter shaft db min.:80.5 mm; Abutment housing - axial space at the small side face/ both sides of the outer ring Cb min.:5 mm; r1,2 min.:2 mm; Fatigue load limit Pu:36 kN; d:70 mm; Abutment diameter shaft Db min.:118 mm; D:125 mm; Fi

r3,4 min.:0.6 mm; Static axial stiffnes:470 N/µm; d:17 mm; N:6.8 mm; Number of attachment bolts:5; Basic dynamic load rating C:21.2 kN; D2:38.1 mm; Attainable speed:4300 r/min; Angle between holes in outer ring (Pitch) α:60 °; Fatigue load limit Pu:1.4 kN;

r1,2 min.:5 mm; Mass shaft washer:29.6 kg; d1:400 mm; d:200 mm; B:41 mm;